TDS1000 and TDS2000 Series Electrical Characteristics
| 1002 | 1012 | 2002 | 2012 | 2014 | 2022 | 2024 | Display (1/4 VGA LCD) | Mono | Mono | Color | Color | Color | Color | Color | Bandwidth*1 | 60 MHz | 100 MHz | 60 MHz | 100 MHz | 100 MHz | 200 MHz | 200 MHz | Channels | 2 | 2 | 2 | 2 | 4 | 2 | 4 | External Trigger Input | Yes on all models | Sample Rate on each channel | 1.0 GS/s | 1.0 GS/s | 1.0 GS/s | 1.0 GS/s | 1.0 GS/s | 2.0 GS/s | 2.0 GS/s | Record Length | 2.5 K points on all models | Vertical Resolution | 8-bits | Vertical Sensitivity | 2 mV to 5 V/div on all models with calibrated fine adjustment | DC Vertical Accuracy | ±3% on all models | Vertical Zoom | Vertically expand or compress a live or stopped waveform | Max Input Voltage | 300 VRMS CAT II; derated at 20 dB/decade above 100 kHz to 13 Vp-p AC at 3 MHz and above | Position Range | 2 mV to 200 mV/div ±2 V >200 mV to 5 V/div ±50 V | BW Limit | 20 MHz for all models | Input Coupling | AC, DC, GND on all models | Input Impedance | 1 MΩ in parallel with 20 pF | Time Base Range | 5 ns to 50 sec/div | 5 ns to 50 sec/div | 5 ns to 50 sec/div | 5 ns to 50 sec/div | 5 ns to 50 sec/div | 2.5 ns to 50 sec/div | 2.5 ns to 50 sec/div | Time Base Accuracy | 50 ppm | Horizontal Zoom | Horizontally expand or compress a live or stopped waveform |
*1 Bandwidth is 20 MHz at 2 mV/div, all models.
+ Acquisition Modes
Peak Detect - High frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 μs/div to 50 s/div. Sample - Sample data only. Average - Waveform averaged, selectable: 4, 16, 64, 128. Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time.
+ Trigger System (Main Only)
Trigger Modes - Auto, Normal, Single Sequence.
+ Trigger Types
Edge (rising or falling) - Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject.
Video - Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM). Pulse Width (or Glitch) - Trigger on a pulse width less than, greater than, equal to or not equal to a selectable time limit ranging from 33 ns to 10 sec.
+ Trigger Source
2-channel models - CH1, CH2, Ext, Ext/5, AC Line.
4-channel models - CH1, CH2, CH3, CH4, Ext, Ext/5, AC Line.
+ Trigger View
Displays trigger signal while trigger view button is depressed.
+ Trigger Signal Frequency Readout
Provides a frequency readout of the trigger source
+ Cursors
Types - Voltage, Time.
Measurements - [Δ]T, 1/[Δ]T (frequency), [Δ]V.
+ Measurement System
Automatic Waveform Measurements - Period, Frequency, +Width, -Width, Rise-time, Fall-time, Max, Min, Peak-to-Peak, Mean, Cycle RMS.
+ Waveform Processing
Operators - Add, Subtract, FFT.
FFT - Windows: Hanning, Flat Top, Rectangular; 2048 sample points. Sources - 2-channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2. 4-channel models: CH1 - CH2, CH2 - CH1, CH3 - CH4, CH4 - CH3, CH1 + CH2, CH3 + CH4. Autoset Menu - Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset. Autoset Menu for Multiple Signal Types Signal Type | Autoset Menu Choices | Square wave | Single-cycle Multi-cycle, Rising or Falling Edge | Sine Wave | Single-cycle Multi-cycle, FFT Spectrum | Video (NTSC, PAL, SECAM) | Field: All, Odd or Even
Line: All or Selectable Line Number |
+ I/O Interface I/O interface | TDS2CMAX Communications Module< | TDS2MEM Storage Memory and Communication Module | Compatibility | TDS200, TDS1000, TDS2000 Series Oscilloscopes | TDS1000, TDS2000 Series Oscilloscopes | Printer Port | Centronics-type Parallel | Printer Capability (Requires Module) | Graphics File Formats - TIFF, PCX (PC Paint Brush), BMP (Microsoft Windows), EPS (Encapsulated Postscript) and RLE | Printer Formats - Bubble Jet, DPU-411, DPU-412, DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot (9- or 24-pin)*2, Epson C60*2, Epson C80 | Layout - Landscape and Portrait | RS-232 Programmability | Full talk/listen modes. Control of all modes, settings and measurements. Baud rate up to 19,200. 9-pin DTE RS-232 Cable (012-1651-00) Included | GPIB (IEEE std. 488-1987) Programmability | Full talk/listen modes. Control of all modes, settings, and measurements. | Not Available | Mass Storage CompactFlash Memory | Not Available | - *Type 1 CompactFlash memory card supplied with Module*3. - Accepts any Type 1 CompactFlash card, up to and including 1 GB - Built-in Clock/Calendar - Includes CompactFlash to USB Memory Card Reader for use with Personal Computer | OpenChoice™ PC Communications Software | - TDSPCS1 OpenChoice PC Communications Software included with each Module
- Seamless connection from oscilloscope to PC through GPIB and RS-232 - Transfer and save settings, waveforms, measurements, and screen images - Includes a Windows desktop data transfer application in addition to convenient Microsoft Word and Excel Toolbar Add-ins |
*2Requires instrument firmware version 2.12/4.12 or higher to support Epson C60/C80 printer formats.
*3 Supplied Type 1 CompactFlash memory card storage capacity 8 MB or greater.
+ Nonvolatile Storage
Nonvolatile Storage
| Standard | Optional TDS2MEM Storage Memory and Communication Module*4 | Reference Waveform Display | Two 2500 point reference waveforms | Same as instrument only | Waveform Storage | 2 Channel Models | 4 Channel Models | 96 or more reference waveforms per 8 MB | Two 2500 point reference waveforms | Four 2500 point reference waveforms | Setups | 10 front panel setups | 4000 or more front panel setups per 8 MB | Screen Images | N/A | 128 or more screen images per 8 MB (the number of images depends on file format selected) | Save All | N/A | 12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform). |
*4 Supplied with Type 1 CompactFlash memory card, storage capacity 8 MB or greater..
+ Display Characteristics
Display - Monochrome models: 1/4 VGA, backlit passive LCD with adjustable multi-level contrast and inverse video selectable from front panel. Color models: 1/4 VGA, passive color LCD with color on black background with adjustable multi-level contrast. Interpolation - Sin(x)/x. Display Types - Dots, vectors. Persistence - Off, 1 sec, 2 sec, 5 sec, infinite. Format - YT and XY.
+ Environmental and Safety
Temperature
Operating: 0 °C to +50 °C.
Nonoperating: -40 °C to +71 °C
Humidity
Operating and Nonoperating: up to 90% RH at or below +30 °C.
Operating: up to 60% RH up to 50 °C. Nonoperating: up to 60% RH up to 55 °C.
Altitude
Operating and Nonoperating: up to 3,000 m.
Electromagnetic Compatibility - Meets Directive 89/336/EEC, amended by 93/68/EEC, meets or exceeds EN55011 Class A Radiated and Conducted Emissions; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC Framework, demonstrated per Emission Standard AS/NZS 2064; Russian GOST EMC regulations.
Safety - UL3111-1, CSA1010.1, IEC61010-1, EN61010-1.
Physical Characteristics
INSTRUMENT | Dimensions | mm | in. | Width | 323.8 | 12.75 | Height | 151.4 | 5.96 | Depth | 124.5 | 4.90 | Weight | kg | lbs. | Instrument only | 2.0 | 4.4 | with accessories | 2.2 | 4.9 | INSTRUMENT SHIPPING | Package Dimensions | mm | in. | Width | 476.2 | 18.75 | Height | 266.7 | 10.50 | Depth | 228.6 | 9.00 | RM2000 RACKMOUNT | Dimensions | mm | in | Width | 482.6 | 19.00 | Height | 177.8 | 7.00 | Depth | 108.0 | 4.25 |
|
Features & Benefits 
Unparalleled measurement accuracy with up to 200 MHz bandwidth and 2 GS/s maximum sample ratl.
Pulse-width and field- and line-selectable video triggers make the oscilloscope ideal for a wide range of applications. 
Precisely analyze, characterize, and troubleshoot circuits ? at the push of a button with the autoset menu . 
Automatically detects sine waves, square waves, and video signals, with readouts of relevant measurements and additional user-selectable views of the signal. 
Easily document and analyze measurement results using OpenChoice™ software.
