+ TPS2000 Series Electrical Characteristics

Feature	TPS2012	TPS2014	TPS2024
Isolated Channels	2	4	4
Bandwidth*1 (MHz)	100	100	200
Sample Rate (GS/s) per channel	1.0	1.0	2.0
Record Length	Record Length
Display (1/4 VGA LCD)	Color
Battery Operation	Capacity for two hot-swappable battery packs. One standard battery pack offers 4 hours of battery operation. Optional second battery pack extends battery operation to 8 hours. Continuous battery operation is possible by hot-swapping charged batteries.
Automatic Measurements	11
Isolated External Trigger Input (Impedance Isolated)	Yes
Vertical Resolution	8-bits (normal or with averaging)
Vertical Sensitivity	2 mV to 5 V/div on all models with calibrated fine adjustment
DC Vertical Accuracy	±3%
Vertical Zoom	Vertically expand or compress a live or stopped waveform
Max Input Voltage (1 ㏁)*2	300 VRMS CAT II at BNC signal to BNC shell, 1000 VRMS CAT II at probe tip to earth ground with optional P5120 passive, high-voltage probe
Float Voltage*2	600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth
Position Range	2 mV to 200 mV/div ±2 V; >200 mV to 5 V/div ±50 V
Bandwidth Limit	20 MHz
Linear Dynamic Range	±5 div
Time Base Range	5 ns to 50 s/div	5 ns to 50 s/div	2.5 ns to 50 s/div
Time Base Accuracy	50 ppm
Input Impedance	1 MO ±2 % in parallel with 20 pF
Input Coupling	AC, DC, GND
Horizontal Zoom	Horizontally expand or compress a live or stopped waveform
FFT	Standard
RS-232, Centronics-Parallel Ports	Standard
PC Connectivity	Standard
Integrated CompactFlash® Mass Storage	Standard
Power Measurements	Optional package that offers instantaneous power waveform analysis, waveform analysis, harmonics analysis, switching loss, phase angles, dv/dt and di/dt cursors

*1 Bandwidth is 20 MHz at 2 mV/div, all models. Bandwidth is 200 MHz typical at 5 mV/div, 200 MHz models only. Bandwidth is 200 MHz typical between 40 °C and 50 °C, 200 MHz models only.

*2 Please refer to Environmental and Safety specifications.

+ Acquisition Modes

Peak Detect - High frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 µs/div to 50 s/div.

Sample - Sample data only.

Average - Waveform averaged, selectable: 4, 16, 64, 128.

Single Sequence - Use the Single Sequence button to capture a single triggered acquisition sequence at a time.

Scan/Roll Mode - At acquisition time base settings of =100ms/div .

+ Trigger System (Main Only)

Trigger Modes - Auto, Normal, Single Sequence

+ Trigger Types

Edge (rising or falling) - Conventional level-driven trigger. Positive or negative slope on any input. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject.

Video - Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM).

Pulse Width (or Glitch) - Trigger on a pulse width less than, greater than, equal to, or not equal to a selectable time limit ranging from 33 ns to 10 sec.

+ Trigger Source

2-channel model - CH1, CH2, Ext, Ext/5, Ext/10.

4-channel models - CH1, CH2, CH3, CH4, Ext, Ext/5, Ext/10.

+ Trigger View

Displays trigger signal while trigger view button is depressed.

+ Trigger Signal Frequency Readout

Provides a frequency readout of the trigger source with 6-digit resolution.

+ Cursors

Types - Voltage, Time.

Measurements - ?T, 1/?T (frequency), ?V, dv/dt*3, di/dt*3.

*3 Requires TPS2PWR1 power application package

+ Measurement System

Automatic Waveform Measurements - Period, Frequency, +Width, –Width, Rise time, Fall time, Max, Min, Peak-to-Peak, Mean, Cycle RMS.

+ Waveform Processing

Operators - Add, Subtract, Multiply, FFT.

FFT - Windows: Hanning, Flat Top, Rectangular; 2048 sample points.

Sources -

2-channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2, CH1 × CH2.

4-channel models: CH1 - CH2, CH2 - CH1, CH3 - CH4, CH4 - CH3, CH1 + CH2, CH3 + CH4, CH1 × CH2, CH3 × CH4.

Autoset Menu - Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset.

Autorange - Allows the user to change test points without resetting the oscilloscope.

+ Autoset Menu for Multiple Signal Types

Signal Type	Autoset Menu Choices
Square wave	Single-cycle, Multi-cycle, Rising or Falling Edge
Sine Wave	Single-cycle, Multi-cycle, FFT Spectrum
Video (NTSC, PAL, SECAM)	Video (NTSC, PAL, SECAM) Field: All, Odd, or Even Line: All or Selectable Line Number

+ Nonvolatile Storage

Nonvolatile Storage	Standard (with CompactFlash® Mass Storage)
Reference Waveform Display	Two 2500 point reference waveforms
Waveform Storage	96 or more reference waveforms per 8 MB
Setups	4000 or more front panel setups per 8 MB
Screen Images	128 or more screen images per 8 MB (the number of images depends on file format selected)
Save All	12 or more Save All operations per 8 MB. A single Save All operation creates 2 to 9 files (setup, image, plus one file for each displayed waveform).

+ Display Characteristics

Display - 1/4 VGA, passive color LCD with color on black background with adjustable multi-level contrast and brightness controls.

Interpolation - Sin(x)/x.

Display Types - Dots, vectors.

Persistence - Off, 1 sec, 2 sec, 5 sec, infinite.

Format - YT and XY.

+ I/O Interface

Printer Port (standard) - Centronics-type Parallel.

Graphics File Formats – TIFF, PCX (PC Paint Brush), BMP (Microsoft Windows), EPS (Encapsulated Postscript) and RLE.

Printer Formats – Bubble Jet, DPU-411, DPU-412, DPU-3445, Thinkjet, Deskjet, Laser Jet, Epson Dot (9- or 24-pin), Epson C60, Epson C80.

Layout – Landscape and Portrait.

RS-232 Port (standard) - 9-pin DTE.

RS-232 Programmability - Full talk/listen modes. Control of all modes, settings and measurements. Baud rate up to 19,200.

Mass Storage CompactFlash® Memory -

• Accepts any Type 1 CompactFlash® card, up to and including 1 GB (card not included).