3390 > 전력분석기 | 삼성종합계측기

전기/전자계측기 환경측정기 통신계측기 재료/측정/형식승인 전자파관련계측기 기타 중고계측기

Home 전기/전자계측기 전력분석기

1번째 이미지 새창

3390 요약정보 및 구매

제조사	HIOKI
원산지	JAPAN
브랜드	HIOKI
모델	3390
판매가격	전화문의
배송비결제	주문시 결제

위시리스트 추천하기

이전상품 AFLEX-3005 다음 상품 3334 / 3334-01

상품 정보

상품정보
상품문의 0
배송 및 반품정보
관련상품 0

상품 상세설명

· 효율측정과 FFT 분석을 한번에
· 고확도를 유지한 채 50ms의 데이터 갱신비율로 고속 동시 측정
· 10rpm~100,000rpm(6극 모터시) 최속갱신 비율로 자동측정
· 직류,참실효치의 전류 및 전력적산기능에 의해 수전,매전,소비,회생전력량의 측정
· 작고 가벼워 휴대가 편리함

기본 정확도 : ±0.05%rdg. ±0.05%f.s.(50/60Hz) ±1.5%rdg. ±0.5%f.s.(100kHz시)

대역 : DC 0.5Hz~150kHz

입력 : 절연4채널입력(단상에서 3상4선까지 측정라인에 대응)

측정항목 : 전압,전류,유효전력,피상전력,무효전력,역률,위상각,주파수,효율,전류적산,전력적산,
전압피크,전류피크,실효치,함유율,위상각,위상차,왜곡률,불평형률

측정기능 : 노이즈측정,정류방식선택,스케일링,에버리지,효율,손실연산,참실효치,평균치,
교류성분,직류성분,기본파성분을 동시측정

데이터갱신비율 : 50ms

메모리 : USB메모리,CF카드사용가능(대용량미디어로 장기데이터 저장가능)

통신인터페이스 : USB,LAN(HTTP 서버기능에 따라 웹브라우저에서 원격조작가능)

동기측정 : 가능(부속소프트웨어에서는 최대 4대에서 간단하게 PC로 데이터를 취득하여 기록가능)

온도측정 : 방사온도계와 조합하여 기록가능(RS-232C인터페이스에 접속)

결선확인 : 벡터표시(간단하게 3상측정시의 결선미스를 사전확인가능)

표시 : 9인치와이드화면(800도트 X 480도트)
Basic specifications

Measurement line type	Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, threephase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel
Measurement items	Voltage, Current, Voltage/current waveform peak, Active power, Reactive power, Apparent power, Power factor, Phase angle, Frequency, Current integration, Power integration, Efficiency, Loss, Voltage/current ripple factor
	Noise measurement (FFT processing): RMS spectrum of voltage/current Harmonic measurement: RMS value, Content factor, Phase angle, Total distortion, Disequilibrium factor
	Additional functions (With optional 9791 or 9793 installed in the main unit) : Torque, Rotation, Frequency, Slip, or Motor output
Harmonic measurement	Input: 4ch, Synchronization frequency range: 0.5Hz to 5kHz, Number of harmonic orders: Max. 100th order
Noise measurement	Number of channels: 1ch (select one channel from CH1 to CH4), Maximum analysis frequency: 100k/ 50k/ 20k/ 10k/ 5k/ 2kHz
Measurement range	Voltage range: 15 to 1500 V, 7 ranges
	Current range: 400 mA to 500 A (depends on current sensor, 20A/ 50A/ 200A/ or 500A rated)
	Power range: 6.0000 W to 2.2500 MW (depends on combination of voltage and current range)
	Frequency range: 0.5Hz to 5kHz
Basic accuracy	Voltage: ±0.05% rdg. ±0.05% f.s. Current: ±0.05% rdg. ±0.05% f.s. + current sensor accuracy Active power: ±0.05% rdg. ±0.05% f.s. + current sensor accuracy
Synchronization frequency range	0.5Hz to 5kHz
Frequency band	DC, 0.5Hz to 150kHz
Data update rate	50ms (For harmonic measurement, depends on the synchronization frequency when less than 45Hz)
Display refresh rate	200ms (Independent of internal data update rate; waveform and FFT depend on the screen)
Data save interval	OFF, 50m/ 100m/ 200m/ 500msec, 1/ 5/ 10/ 15/ 30sec, 1/ 5/ 10/ 15/ 30/ 60minutes
External interfaces	LAN, USB (communication/ memory), RS-232C, CF card, Synchronization control
Power supply	100 to 240V AC, 50/60Hz, 140VA max.
Dimensions, mass	340mm (13.39in) W × 170mm (6.69in) H × 157mm (6.18in) D, 4.8kg (169.3oz)
Supplied accessories	Instruction Manual × 1, Measurement Guide × 1, Power cord × 1, USB cable × 1, D-sub connector × 1 (when 9792 or 9793 is installed), Color label × 2

Specifications for the Motor Testing Option

Number of input channels	3 channels, CH A: Torque signal input (DC V / Frequency input), CH B: Rotation signal input (DC V / Pulse input), CH Z: Z-phase signal input (Pulse input)
Measurement item	Voltage, Torque, Rotation, Frequency, Slip, Motor power
DC V (CH A/ B)	Measurement range: ±1 V/ ±5 V/ ±10 V, Accuracy: ±0.1 % rdg. ±0.1 % f.s.
Frequency (CH A)	Effective amplitude range: ±5 V peak, Measurement band: 1 kHz to 100 kHz
Pulse (CH B)	Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 1 Hz to 200 kHz
Pulse (CH Z)	Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 0.1 Hz to 1 kHz